振动时效的动应力判据

采用多元非线性回归分析方法，求得振动时效试验中动应力σｄ，载荷次数ｎ和残余应力当量ｋ对消应力效果εｖ的经验方程。从而实现用动应力现场速测来定量评定振动时效工艺效果。本文主要介绍动应力判据方程的建立方法及其应用。     

APplication of Continuous Thermodynamics to the Stability of Polymer Systems. II

A determinant criterion for the critical state in solutions and mixtures of polydisperse polymers is established within the general framework of Gibbs theory. The treatment continues an earlier paper by considering more general Gibbs free energy relations: The function replacing the x-term in the classic Flory-Huggins equation is permitted to depend on a finite number of moments of the polymer distribution(s) so as to embrace most Gibbs free energy relations of practical use. The new criterion leads to a very large reduction of computer time and of needed storage capacity compared to the traditional Gibbs determinant criterion. Some relations known from the literature are shown to be special cases of the established new criterion.     

坚硬顶板爆破切顶在沿空留巷中的应用研究

当煤层上方为坚硬顶板时,在工作面回采期间容易出现大面积悬顶,导致巷旁充填体出现大变形破坏,极大威胁采煤安全.为解决这一问题,以某矿1205工作面沿空留巷为工程背景,分析了爆炸围岩裂隙范围和坚硬顶板破断特征,建立了切顶卸压围岩结构力学模型,研究表明,相邻炮孔爆炸后,炮孔间裂隙互相贯穿,降低了顶板强度,同时当切顶角为15°时,巷道稳定性较好.工程实践结果表明:采用爆破切顶技术后,顶板下沉量减小了62.3%,较好地保证了围岩稳定性.     

Controlled fabrication of hierarchically microstructured surfaces via surface wrinkling combined with template replication

In this paper,we present a simple method by combining surface wrinkling and template replication to create a series of hierarchical structures on polydimethylsiloxane(PDMS) elastomer.The primary stable lined patterns are formed by duplicating commercialized compact disk and digital versatile disk with PDMS.The secondary microscale patterns are from surface wrinkling,which is elicited by oxygen plasma(OP) treatment of the prestrained PDMS stamp followed with the prestrain release.By systematically varying the OP exposure duration,the prestrain,and the angle(θ) between the primary pattern orientation and the prestrain direction,we obtain highly ordered well-organized composite patterns from different patterning techniques and with different length scales and mechanical stabilities.     

基于供应方生产能力的应急物资生产模型

利用期权契约所建立的政企合作储备应急物资模式能够有效解决政府单独储备模式所造成的物资储备量过少或过多而引起的困境。然而由于应急物资的需求特性,若应急物资供应企业采用按单生产方式安排生产储备计划,势必会造成库存水平升高,引发资金周转困难等问题,对政企之间的长期合作造成不利影响。基于此,本文设计了基于供应方生产能力的应急物资生产模型。该模型在政府利用批发价格契约与期权契约采购应急物资的基础上,研究了供应方根据自身生产能力进行柔性生产时的生产与储备问题。通过推导政企双方最优决策后,重点分析了期权权利金,执行价格,加急生产成本等参数对供应方生产决策的影响,并证明与按单生产模式相比,柔性生产模式可有效降低供应方的库存量与生产成本,提高其利润,继而提高整体供应链的利润水平,有助于促进政企之间长期稳定的合作。     

Electrochemical Deposition of Azobenzene‐Containing Network Films with High‐Contrast and Stable Photoresponse

To fabricate stable photoresponsive films and devices, a cross‐linked network that firmly fixes the position of the chromophores is an ideal structure, because aggregation and/or phase separation effects of chromophores in matrix can be effectively restrained in such robust films. Herein, the in situ electrochemical deposition (ED) of azo‐based precursors containing multielectroactive carbazole units is utilized to construct highly cross‐linked photoresponsive films. 2‐(4‐(9,9‐bis(6‐(9H‐carbazol‐9‐yl)hexyl)‐9H‐fluoren‐2‐yl)phenyl)‐1‐(4‐(9,9‐bis(6‐(9H‐carbazol‐9‐yl)hexyl)‐9H‐fluoren‐7‐yl)phenyl)diazene (BFCzAzo) with high solvability in electrolyte solution, high electroactivity, and highly efficient photoresponsive ability is synthesized by Suzuki coupling reaction as a kind of ED precursor. A highly cross‐linked photoresponsive film is fabricated by ED method using BFCzAzo as ED precursor. The film can be patterned in large area by irradiation with interfering laser beam (355 nm), and the pattern possesses excellent thermal stability and insoluble ability in both organic and inorganic solvents. Excellent reversibility of the nanostructures is demonstrated by irradiation with 550 nm laser beam.

     

透明导电薄膜ITO对浅面浮雕VCSEL的影响

对于顶面出光的浅面浮雕VCSEL结构,有源区的电流密度分布的不均性制约着单模稳定性的提高。为此,提出了一种新型结构:氧化铟锡透明导电薄膜(ITO)浅面浮雕VCSEL。该结构不仅能够增大高阶模式的阈值增益,还能够提高基模的增益,实现基模对高阶模式的稳定抑制。研究了ITO的厚度对阈值增益的影响及ITO对VCSEL有源区电流密度分布的影响。研究结果表明:在ITO的厚度为半波长的整数倍时,基模对高阶模式的限制作用最强;ITO通过改善VCSEL有源区的电流密度分布,达到了增大基模的增益和降低高阶模式增益的目的,同时还降低了串联电阻和外电压。     

Controllable alignment of liquid crystals based on the surface relief gratings from a photocross-linkable organic monomer

The orientational control of liquid crystal (LC) molecules is essential for high-quality liquid crystal displays, and the photo-induced surface relief grating (SRG) is a facile and effective non-contact process. Here, SRGs with different period and depth were prepared with a photocross-linkable organic monomer 4-propyldiphenylacetylenecarboxylic acid cinnamyl ester (PDACE), and the LC alignment induced by SRG was studied. It is found that both the surface topography and the chemical nature of the surface are responsible for the LC alignment, which is strongly dependent on the groove geometry of the gratings. Furthermore, the patterned LC cell was fabricated with the patterned SRG surface. These results demonstrate that the planar, perpendicular and patterned orientations of LC can be easily photo-controllably obtained with PDACE, which have important applications in optical devices.     

Patterning Flexible Substrates Using Surface Relief Structures in Azobenzene Functionalized Polymer Films

A novel method for maskless micro-patterning of polymeric substrates is presented. First, an azobenzene functionalized polymer film is spin-coated on a Poly (ethylene terephthalate) (PET) sheet. Then surface relief structures are optically inscribed on the polymer film by interference of laser beams. The patterned azobenzene functionalized film is then etched in the plasma chamber such that the gratings are transferred to the PET substrate. Finally, any remaining azobenzene functionalized polymer is dissolved away using an appropriate solvent. This method of patterning can be broadly applied to a variety of flexible/polymeric substrates and the resolution is not limited by the substrate thermo-mechanical properties.